A few words to the models
Obviously i dont own any of the designs and all names and designs belong to their respective owners.
Secondly, they are made with a lot of bleeding, so that you can cut them out without any white edges.
So the final depth of the model is defined by you.
Keep in mind some of the synths have an angled desgig, keep that in mind when you cut them out, also leave some ears for glue.
Mine are laserprinted on 300gram paper, then cut out with a scalpel/carpenters knife, then i slightly cut them from the backside along the edges.
No free hand work, always use a straight metalsheet or similar to assist cutting.
Small clamps work perfect while the glue hardens đŸ˜‰
I N E V I T A B L E C R A F T S L A B 