Next series of projects will be about different remote controlled or programmed motion control devices for filming.
The following projects are on my mind:
REMOTE CONTROLLED FOLLOW FOCUS
Very easy to realize if its cablebounded. A servo without feedback
and a servotester for endless motion, and a standard servo plus
remote control for a wireless option.
REMOTE CONTROLLED SLIDER DOLLY
Same procedure as above but with a motor+esc instead of the servo.
HANDRAIL DOLLY // arduino
I had the idea to make a tiny dolly for a gopro that can run on different handrails. A bit like a ladder dolly, but way more flexible construction, cause a ladder is more or less a standard item with a standard lenght width etc.
This is not the case with handrails.
Speaking of diameters, profiles (round, square etc) and also the surface of the handrail.
Also handrails mounted on the wall or stairs in some way, so you wanna make sure that at least most handrails are usable for the dolly, so the dolly has to be some sort of module-based and very flexible.
TIMELAPSE MOVING HEAD
I will Use two servos and an arduino
Either microservos plus an uno or micro, or bigger servos and a powersolution, cause arduino cant drive strong motors.
>>i started this project in a new post